.
 |
 |
 |
 |
......................................................
| ECP 200 EXPERT PULSE |
Brochure download |
|
||
| CONTROL PANEL FOR PULSE ELECTRONIC EXPANSION VALVE |
||||
|
Electrical panel for cold room control with differential magnetothermic circuit breaker and with integrated command of pulse electronic expansion valve 230Vac On/Off and single-phase compressor up to 2HP. This panel can be used also only for the control of the evaporating unit. |
|
|
| Applications • Complete control of single-phase static or ventilated refrigeration systems up to 2 HP, with off-cycle or electrical defrosting and direct or pump-down compressor stop. • Thought for systems with evaporator managed by ON/OFF electronic expansion valve at 230 Vac. • Utility for managing the single-phase evaporating unit with electronic expansion valve only ON/OFF at 230 Vac. Main characteristics • Defrost with real time clock. • Indipendent and separated functions for alarm relay and TeleNET or Modbus-RTU standard protocol. • Control of electronic expansion valve ON/OFF with 230 VAC coil. • The integration of the valve control permits its programming and a simplified management with the same display, enabling an immediate start-up of the system. • Direct control of compressor, defrosting heaters, evaporator fans and room light with free-voltage outputs. • Built-in differential magnetothermic breaker for protection and cut-off of refrigeration unit. • Innovative, stylish design. Transparent cover for access to magnetothermic breaker, all with IP 65 protection rating. • Auxiliary relay with parameter-configured activation (alarm, temperature set-point, direct control via frontal pushbutton, thermostat-holder demisting element). • RS485 for connection to TeleNET industrial supervision network or Modbus-RTU standard protocol. • Easy installation and opening thanks to new hinged cover. • Simple, flexible programming gives extreme versatility of use. • Compressor can be run in pump-down stop mode. • Installation times and costs reduced thanks to incorporation of control and protection in a single room-dedicated unit. |
||
| TECHNICAL CHARACTERISTICS |
ECP 200 EXPERT PULSE |
|
| Dimension |
262 x 168 x 97 mm |
|
| Weigh | 2 Kg | |
| Protection rating |
IP 65 |
|
| Power supply |
230 VAC ±10% 50/60 Hz | |
| Load type |
Single phase |
|
| Working temperature |
-5 ÷ +50°C |
|
| Storage temperature | -10 ÷ +70°C |
|
| Relative ambient humidity |
<90% Rh | |
| Main switch - general protection |
2 poles differential magnetothermic 16A |
|
| Control |
PEGO | |
| Defrosting |
Electrical | |
| Component status indicator |
Led + Display |
|
| Alarm signals |
Led + Buzzer |
|
| Defrost |
PRESENT (RTC) |
|
| INPUTS |
||
| Ambient probe |
NTC 10 KΩ |
|
| Evaporator probe |
NTC 10 KΩ | |
| Suction probe |
NTC 10 KΩ | |
| Evaporation pressure probe |
4-20MA / 0-5V RATIO |
|
| Door switch |
PRESENT | |
| High/low pressure switch |
PRESENT | |
| Man in cold room alarm |
PRESENT | |
| Compressor work mode selection |
Pump down - Thermostat |
|
| Outputs |
||
| Compressor | 1500 W (AC3) |
|
| Evaporator fans |
500 W (AC3) free voltage contact |
|
| Defrosting heater |
3000 W (AC1) free voltage contact | |
| Electronic valve |
Pulse 230 Vac |
|
| Room light |
800 W (AC1) free voltage contact |
|
| Auxiliary relay or alarm |
100 W free voltage contact |
|
| Supervision system |
TELENET/MODBUS-RTU | |
| DIMENSION | ||
 |
||
| CONNECTION SCHEME |
||
 |
||
| (*) = Configurable function | ||
| DOWNLOAD INSTRUCTION | ||
 Instruction manual(documentation available through registration) |