.
 |
 |
 |
 |
......................................................
| ECP200 BASE | Brochure download |
|
||
| A LINE OF CONTROL PANELS FOR COLD ROOMS |
||||
|
A line of control panels for cold rooms with single-phase compressor up to 2 HP, specially designed to provide greater flexibility at a competitive cost. |
|
|
| Main characteristics • Direct control of compressor, defrosting heaters, evaporator fans and room light using free-voltage contacts. • Compact, self-extinguishing ABS housing with IP65 protection rating. • On “A” versions there is an auxiliary relay with parameter-configurable activation (alarm, temperature set-point, direct frontal pushbutton control, door heater elements, freon solenoid control where pump-down compressor operation is applied). • RS485 for connection to TeleNET industrial supervision network or Modbus-RTU standard protocol. ECP 200 Base2 Allows user to control compressor and cold room light. Configurable auxiliary relay or alarm output also available on the ECP200 Base 2A version. Applications • Single-phase system up to 2 HP, off-cycle defrosting. • Remote control for compressor enabling to be linked to power board. ECP 200 Base4 Allows user to control all the components on the refrigeration system: compressor, evaporator fans, defrosting heaters and room light. Configurable auxiliary relay or alarm output also available on the ECP200 Base 4A version. Applications • Single-phase static or ventilated system up to 2 HP , off-cycle or electrical defrosting with direct compressor shutdown (or in pump-down mode, on the ECP 200 BASE4 A version). • Remote control for compressor, defrosting and fans enabling to be linked to power board. • Device of single-phase evaporating unit with cold solenoid valve or remote motor condenser unit enabling. |
||
| TECHNICAL CHARACTERISTICS |
ECP200 BASE2 |
ECP200 BASE4 |
||
| Dimension | 203x193x79 mm |
203x193x79 mm | ||
| Weight | 0,5 Kg | 0,5 Kg | ||
| Protection rating |
IP 65 |
IP 65 | ||
| Power supply |
230 V AC ±10% 50/60 Hz |
230 V AC ±10% 50/60 Hz | ||
| Load type |
Single-phase |
Single-phase | ||
| Working temperature |
-5 ÷ +50°C |
-5 ÷ +50°C | ||
| Storage temperature | -10 ÷ +70°C | -10 ÷ +70°C | ||
| Relative ambient humidity |
< 90% Rh |
< 90% Rh |
||
| Range of reading | -45 ÷ +45°C | -45 ÷ +45°C | ||
| Defrost | Off cycle |
Electrical | ||
| Status indicators |
Led + Display | Led + Display | ||
| Alarm signals |
Led + Buzzer | Led + Buzzer | ||
| INPUTS |
||||
| Ambient probe |
NTC 10 KΩ |
NTC 10 KΩ | ||
| Evaporator probe |
NTC 10 KΩ | |||
| Overload protection |
PRESENT |
PRESENT | ||
| Door switch |
PRESENT | PRESENT | ||
| OUTPUTS |
||||
| Compressor |
1500 W (2 HP) |
1500 W (2 HP) | ||
| Defrost | 3000 W (AC1) | |||
| Evaporator fans |
500 W |
|||
| Cold room light |
800 W (AC1) | 800 W (AC1) | ||
| Alarm relay / AUX (voltage free contact) |
PRESENT (on "A" version only) |
PRESENT (on "A" version only) |
||
| Supervision | TELENET / MODBUS-RTU |
TELENET / MODBUS-RTU | ||
| DIMENSION |
||||
 |
|
|||
| CONNECTION SCHEME |
||||
 |
 |
|||
| (*) = Configurable function |
(*) = Configurable function | |||
| DOWNLOAD INSTRUCTION | ||
 Instruction manual(documentation availble through registration) |